KWS Floor Mounted Door Buffer/Holder
KWS Door holders:
K1051 - With anchor bolt for building in.
K1052 - For face fixing.
Rubber buffer in black, spring-loaded, anchor bolt hot dip galvanised.
Door Width - up to 1000mm
Door Height - up to 2200mm
Door Weight - up to 100kg
Door Closer Suitable
For holding the door it is moved towards the door holder until it is caught by the hook, it is released by actuating the hook while pushing the door against the holder at the same time.
With anchor bolt: Put the provided anchor bolt in the floor and grout it at the desired arresting point which should be the greatest possible distance from the door hinge. After the grouting material has hardened, screw the door holder on and fix the roller block at the corresponding position on the door.
Without anchor bolt: Screw the holder with four screws and the plugs on the floor at the desired position which should be the greatest possible distance from the door hinge and fix the roller block on the door at the corresponding position.
For height compensation, we recommend the additional use of the shim 1610 (20 mm).
KWS Floor Mounted Door Buffer/Holder (KWS K1051)
- Brand: KWS
- Product Code:KWS K1051